|
|
Post by LilBigMan on Nov 18, 2005 18:13:47 GMT -5
Okay, my brother hasnt taken apat his 98 since he got it (last christmas) so I decided a few days ago that I'll take it apart and clean it. How hard could it be? It cant be too different from an A5, right? Well, I finished thinking it all went good, but the next day when we played, his wouldnt re-cock. That was the first time I saw a 98's internals, so I have no clue whats wrong. Can you guys help me out? Its all stock, besides the barrel, but that should have nothing to do with it. Thanks.
[glow=gray,2,300]LBM[/glow]
|
|
|
|
Post by Stoli on Nov 18, 2005 20:06:20 GMT -5
Make sure the sear is installed correctly. Also make sure the ball detent is oriented correctly.
Make sure you didn't jam anything while tightening the screws during re-assembly.
Can you cock it manually?
|
|
|
|
Post by LilBigMan on Nov 18, 2005 20:20:57 GMT -5
I'm thinking it has to do with the sear, because Newman told me that the sear spring probably isnt in, which makes sense, because I was having problems with it putting it all back together, and thats what I initially thought also, but wasnt sure, because like I said, I have no knowledge with the 98.
He can cock it, and it shoots, but after shooting, he has to manually re-cock it, shoot again, re-cock it, shoot ect. Thanks for helping me out!
[glow=gray,2,300]LBM[/glow]
|
|
|
|
Post by MNewman15 on Nov 18, 2005 20:31:44 GMT -5
Yea Some Times I Know What Im Talking About ;D ;D
|
|
tippy
Corporal
Founding Member
Posts: 97
|
Post by tippy on Nov 18, 2005 23:28:48 GMT -5
hey, if ur still havieng prob's, send me a message, i can take some pics/movie(s) of mine so u can besure its all backtogether.
Tippy~
|
|
