|
|
Post by MerrSonn on Dec 17, 2005 23:12:26 GMT -5
I ordered a CCM No-Pro  How exactly do I remove the old feedneck? And I am going to order a 68/45 next week. As icbah said, a strap wrench should work well. If you don't have one, you can also use the back of a mousepad or one of those grippy jar opener things. If the feedneck's attached with loctite you may need to put it under a hairdryer for a few minutes to loosen it up. |
|
Ety
Sergeant
Ya I'm a PwnMaster
Posts: 158
|
Post by Ety on Dec 18, 2005 16:07:24 GMT -5
I got it out but it was a major PITA. I tried using a lighter, and a space heater to heat it then take it out with a strap wrench. Neither worked so I tried with a wrench. Still didn't work. Found a propane torch, and it came right out. All most the whole thing was covered with red loctight.
|
|
Ety
Sergeant
Ya I'm a PwnMaster
Posts: 158
|
Post by Ety on Dec 28, 2005 17:22:02 GMT -5
I got my HPA tank today. I loctighted the feedneck, and cut the halo to fit too. Now I just need to order a new ASA because the Tippy one is was to long. Pics:  |
|
|
|
Post by MNewman15 on Dec 28, 2005 18:19:11 GMT -5
Ety, STOP MAKING YOUR PROMASTER SOOOOO FRIGGIN HOT, Your gunna burn a whole threw your bed or something
|
|
Ety
Sergeant
Ya I'm a PwnMaster
Posts: 158
|
Post by Ety on Dec 28, 2005 18:58:22 GMT -5
Just after a few more things. ASA, Trigger...There goes the bed.  |
|
|
|
Post by Trigga Nometry on Dec 28, 2005 19:50:30 GMT -5
Hot, hot, hot! Love the feedneck and the grips. Now, if you're going to "have a Stiffi" Switch, you really should make that a Red Mamba  . Seriously, looks really nice! |
|
Ety
Sergeant
Ya I'm a PwnMaster
Posts: 158
|
Post by Ety on Dec 28, 2005 20:08:11 GMT -5
Hot, hot, hot! Love the feedneck and the grips. Now, if you're going to "have a Stiffi" Switch, you really should make that a Red Mamba . Seriously, looks really nice! Maybe...I'm ordered a Hybrid Grind, Speed Wheel and Thread protector. I think thats going to be all for this week. Ok Probably not but it might. Next stuff is probably going to be some E-Vents, Pants and Gloves. |
|
Ety
Sergeant
Ya I'm a PwnMaster
Posts: 158
|
Post by Ety on Jan 8, 2006 20:57:45 GMT -5
I got my rail for the Grind today and I bought a black/red shocktech bolt because my bolt was breaking alot of paint.. I'll have pics tommorow.
|
|
|
|
Post by Fear The Sasquatch on Jan 12, 2006 21:16:46 GMT -5
I got my rail for the Grind today and I bought a black/red shocktech bolt because my bolt was breaking alot of paint.. I'll have pics tommorow. hahaha, you bought a new bolt cause the stock one was breakin paint, LOL. sounds like an excuse just to buy a new one. |
|
Ety
Sergeant
Ya I'm a PwnMaster
Posts: 158
|
Post by Ety on Jan 12, 2006 21:20:03 GMT -5
I got my rail for the Grind today and I bought a black/red shocktech bolt because my bolt was breaking alot of paint.. I'll have pics tommorow. hahaha, you bought a new bolt cause the stock one was breakin paint, LOL. sounds like an excuse just to buy a new one. I was looking for a place that sold the Black/Red Shock-tech bolt, i saw it and went to try it out and there was paint on my bolt, and I was getting alot of breaks from some dirt in my barrel and probably the bolt. So ya, it was a good excuse it looks so good on it. I toke pictures I'll resize them later. You're keeping your ProMaster right? |
|
