Post by SpecialK on Oct 18, 2005 7:20:25 GMT -5
Black AGD R/T custom Automag
This marker has been used a little bit over the past 2 years. It has the X-Valve, Level 10 Bolt, Intelliframe, ULE Rail and ULE center feed body. The marker is all black with the front grip moved up closer to the trigger guard.
I purchased a left warp feed rail for it so I could try out the whole warp system. The rail was chewed up when I got it and hasn’t been scratched since. I don’t have the old rail so whoever buys it is out of luck in that department. I will negotiate a little more on the price of the rail if you decide you want to buy the whole marker!
The top of the X-valve also had 2 scratches on top when I got it, where they came from I don’t know!
Complete Price- 395$
But, if someone wants to part it out, I can do that too so here are the prices.
1. Black X-valve and Level 10 bolt-200$
2. Black ULE Center feed body-90$
3. Black ULE Rail, Left warp-40$
4. Black Intellframe with double trigger-85$
Black WGP Autococker
Specs: 2k2 gloss black cocker,
Wgp hinge
Hybrid Contract Killer grips
Wgp delrin bolt
Fgp lpr
44 mag ram
Chrome unknown 3 way
and the black detent
Price- 120$ shipped.
There is only one problem with it, Since I have owned it (for a short few weeks, bought it used) I have had problems with the hoses flying off, mind you tophats would fix the problem beutifully but I need the money! Comes without torpedo.
St!ff! Sw!tch K!t Autococker 14 inch
This is a real nice barrel. It’s made of Carbon Fiber and is the lightest out there for its length- 14 inches. It comes with 4 bore sizers, a barrel bag, and autococker threads.
Works great, looks great
Price-120$
Pictures on Request.
Cops911 Scout Prototype vest, 1 of 1!
This is a basic cops911 scout vest with 4 vertical pod holders, a remote bottle holder, and the regular pockets up front. It uses Velcro to secure the straps and works very well!
I have only used this vest for one season so its still in PERFECT condition!
Price- 80$
Scuba Bottle
This is an 88 cubic foot bottle that can be filled to 3000 PSI. It is almost BRAND new with only about 5 fills in it. Black anodizing (I think its anodizing) has NO scratches. It comes with a boot and a type of fishnet looking plastic material around the bottle to protect it from getting scratched. The valve also has a cover on top.
Price- 175$
Trinity HPA fillstation
This is also almost brand new, I got it about a week before I got the scuba bottle and works great! It has a gauge, a valve for dumping air, and works very well! The black anodizing has NO scratches in it.
Price- 40$
Pure Energy 48CI 3000 PSI Bottle
This bottle has a problem with it, when it was being filled the shop that was filling it didn’t get it connected on well enough, the end result is that the pin valve was smashed up, I’m sure you could get a new top of the valve from PMI if you called them.
Price- 30$
The Rules:
I. No Trades
II. The prices do NOT include Shipping
III. I will NOT put tracking or insurance on anything unless specified.
IV. I take Paypal and Cashiers checks, THATS IT.
V. Prices are slightly negotiable, but don’t lowball me-I WILL report you to the moderators/administrators. If your not smart enough to know what its worth, I’m not going to work with you.
Thanks for looking folks!
This marker has been used a little bit over the past 2 years. It has the X-Valve, Level 10 Bolt, Intelliframe, ULE Rail and ULE center feed body. The marker is all black with the front grip moved up closer to the trigger guard.
I purchased a left warp feed rail for it so I could try out the whole warp system. The rail was chewed up when I got it and hasn’t been scratched since. I don’t have the old rail so whoever buys it is out of luck in that department. I will negotiate a little more on the price of the rail if you decide you want to buy the whole marker!
The top of the X-valve also had 2 scratches on top when I got it, where they came from I don’t know!
Complete Price- 395$
But, if someone wants to part it out, I can do that too so here are the prices.
1. Black X-valve and Level 10 bolt-200$
2. Black ULE Center feed body-90$
3. Black ULE Rail, Left warp-40$
4. Black Intellframe with double trigger-85$
Black WGP Autococker
Specs: 2k2 gloss black cocker,
Wgp hinge
Hybrid Contract Killer grips
Wgp delrin bolt
Fgp lpr
44 mag ram
Chrome unknown 3 way
and the black detent
Price- 120$ shipped.
There is only one problem with it, Since I have owned it (for a short few weeks, bought it used) I have had problems with the hoses flying off, mind you tophats would fix the problem beutifully but I need the money! Comes without torpedo.
St!ff! Sw!tch K!t Autococker 14 inch
This is a real nice barrel. It’s made of Carbon Fiber and is the lightest out there for its length- 14 inches. It comes with 4 bore sizers, a barrel bag, and autococker threads.
Works great, looks great
Price-120$
Pictures on Request.
Cops911 Scout Prototype vest, 1 of 1!
This is a basic cops911 scout vest with 4 vertical pod holders, a remote bottle holder, and the regular pockets up front. It uses Velcro to secure the straps and works very well!
I have only used this vest for one season so its still in PERFECT condition!
Price- 80$
Scuba Bottle
This is an 88 cubic foot bottle that can be filled to 3000 PSI. It is almost BRAND new with only about 5 fills in it. Black anodizing (I think its anodizing) has NO scratches. It comes with a boot and a type of fishnet looking plastic material around the bottle to protect it from getting scratched. The valve also has a cover on top.
Price- 175$
Trinity HPA fillstation
This is also almost brand new, I got it about a week before I got the scuba bottle and works great! It has a gauge, a valve for dumping air, and works very well! The black anodizing has NO scratches in it.
Price- 40$
Pure Energy 48CI 3000 PSI Bottle
This bottle has a problem with it, when it was being filled the shop that was filling it didn’t get it connected on well enough, the end result is that the pin valve was smashed up, I’m sure you could get a new top of the valve from PMI if you called them.
Price- 30$
The Rules:
I. No Trades
II. The prices do NOT include Shipping
III. I will NOT put tracking or insurance on anything unless specified.
IV. I take Paypal and Cashiers checks, THATS IT.
V. Prices are slightly negotiable, but don’t lowball me-I WILL report you to the moderators/administrators. If your not smart enough to know what its worth, I’m not going to work with you.
Thanks for looking folks!
