Mr.Power's RT Mod

Good post. I remember when he started working on the RT project. Man, he put a boat-load of work into that.

Must....see.....fully tuned......VIDEO!!!!

Here are a few more mods that will increase the speed

Glue a washer to the end of the plunger (the side that is in the piston) same amount of air in less space=more pressure

Put a straw on the pin that the sear rests in (increases sear wear, but extremly fast rt)

Qev on the cyclone

RVA with red maddmann spring

FVA in a lot to lower the FPS




PS what is the springer PB's modded LPK?

[Tagged Post]

im not sure why i am asking but how do you know its shooting 25 bps without there being balls in it? me and Mr.Powers did a dry firing a while back and my god it was fast but dry firing cause a major usage of air vulcanized or not....hmmmm i just thought of something... i'll have to get back to y'all

and adding balls will take it down 5-6

Btw, travis there are some parts in this modification that can make it faster. a washer on the end of the plunger isn't what I had in mind, hell, if you want to tighten the spring, then add another next to where the tombstone goes in. This does not increase the flow of air though, but rather decreases it. The tighter the spring, the faster the valve closes.

And if you look in my mod, it will also show you a way to get your cyclone to keep up. It worked on mine and Dev.D's. should net you a good 21+ with balls.

The sear-straw mod is best done with a capri-sun straw. A straw with too thick a diameter will have fully-auto burst issues.

I don't use a QEV, on a cyclone over 2 years old without so much as o-ring replacement, and I have pushed it to the 20+ mark... by adjusting the cyclone return spring.

(QEV's aren't cheap. Add if you must...)

You are absolutely right about using an RVA, and screwing in the FVA as much as possible, the idea is to generate as much blowback as possible

The Spring Paintball Modded LPK is wher one already has a female palmer stab. and is running the air directly into the collar of the volumizer instead of through the DOP VA adapter. DJthunders Store carries it like this, and it was originally pioneered by Trigga Nometry on the Old A5OG.