|
|
Post by Decker on Dec 26, 2005 23:27:55 GMT -5
Well I'm getting quite annoyed with my stock spyder Imagine. I have to keep it clean like religiously. If i slide or dive and but a mear SPECK of dirt gets into it, it just jams. I'm also having problems with consistency and various other things. I'm not an expert on spyders at all, any one know of some cure-alls for them?
|
|
|
|
Post by ferkjace on Dec 26, 2005 23:32:06 GMT -5
Probably a reg. Or HPA.
I would try polishing the interals if you don't mind spending an hour and $5 for mothers mag.
I like my Spyders. My Classic is really probably the best marker I have for the money invested.
|
|
|
|
Post by Decker on Dec 26, 2005 23:40:09 GMT -5
Im trying to get it up to snuff after its been collecting dust for a year or 2, any ideas for some upgrades to get it on par with a speedball gun just for screwin around with (not really serious competitions)
|
|
|
|
Post by ferkjace on Dec 26, 2005 23:52:21 GMT -5
Probably needs seals, then.
On a tight budget, a feedneck (Lapco or CCM?), barrel (Lapco or CP), and spring kit are musts.
An ACS bolt might not be a bad bet. I have not tried them myself though.
A regulator or HPA is a big help, but not that cost effiecent. Maybe an anti-siphon?
|
|
