|
|
Post by skuldragger on Jan 10, 2006 15:19:33 GMT -5
I have 2 A5's with E-grips and flatlines, 1 is set up for CO2. expansion chamber, antisihpon tube and the other is compressed air.Both have polished internals. I'm planning on this spring getting RVA's and Maddman spring kits and replacing the O-rings for both. My question to the forum is this, how far do I have to chase upgrades after that? I'm very happy with the performance of both . All feedback would be apprieciated.
|
|
|
|
Post by Decker on Jan 10, 2006 17:57:56 GMT -5
It really deends on what you want to do with it. Is there a style of play or type of game you like most? Is there anything like speed, compactness, or anything you may like?
|
|
|
|
Post by travis1581 on Jan 10, 2006 19:26:44 GMT -5
I personally would get a WAS or APE board for the a5 that is set up with HPA and get a QEV for the cyclone. Maybe a barrel set and buy an extra back on ebay... it really depends on your style of play
|
|
|
|
Post by JDCat on Jan 10, 2006 22:59:16 GMT -5
Just remember... do one upgrade at a time. Trouble shooting can be a bear when you do a few things at once. I'm in the middle of that right now and it ain't fun. Good luck with whatever you choose to do.
|
|
|
|
Post by skuldragger on Jan 11, 2006 11:07:06 GMT -5
I'm not sure what a WAS or APE board, QEV is or what they'd do for me( I've been searching around to find out,any ideas where I can get more detailed info?). Thanks for the info, it's all food for thought. I'm a tried and true woodsballer. I've tried speedball in the winter to satisfiy my jones but I didn't take to it.
|
|
|
|
Post by Rifle on Jan 11, 2006 17:40:34 GMT -5
A cheap and easy mod is a sling swivel. Great for woodsball.
|
|
|
|
Post by JDCat on Jan 11, 2006 17:46:12 GMT -5
Here are a couple of links for you to check out. The first is for Wicked Air Sports, you can check out their offerings for the A5... www.wickedairsportz.comSecond is for Pamler's Persuit Shop, they have stabilizers and QEV (Quick Exhaust Valve) for A5's... www.palmer-pursuit.comAnd third, Advanced Paintball Electronics for the Rampage Board, www.goapeonline.com You may also want to look at tippmannowners.com and undergroundmodshop.com. These are other forums where you might find useful info. Good luck |
|
|
|
Post by Medina on Jan 11, 2006 19:30:30 GMT -5
I agree with what has been proposed so far. I'd do performance first and then cosmetic mods later.
-Upgrade your e-grip board to WAS or Ape.
-Get a very good barrel.
-LPK if you want to have less force on your paint.
-A nice regulator (PPS, AKA, or CP).
Mods really never stop so I'll keep my list short. hehe
|
|
