|
|
Post by cmw0081 on Jan 23, 2006 17:31:09 GMT -5
Gonna order an RVA, Gold Power Tube, and MM Spring kit. Is there anything else I should consider as far as internal upgrades?
Then after that will be the QEV, and a new board and maybe the LPK
|
|
Wings
Private
Go ahead. Test me. I dare you.
Posts: 31
|
Post by Wings on Jan 23, 2006 17:35:45 GMT -5
I'd say you got everything you need. Just be sure to put em in one at a time so if something goes wrong it's easier to troubleshoot.
|
|
ivan
Private
Posts: 34
|
Post by ivan on Jan 23, 2006 19:56:01 GMT -5
id maybe also consider polishing the receivers as an internal upgrade
|
|
|
|
Post by Medina on Jan 24, 2006 10:33:52 GMT -5
^I agree, polishing the internals is a good mod to your internals.
|
|
|
|
Post by cmw0081 on Jan 24, 2006 18:50:29 GMT -5
OK order the stuff this morning. Going to polish my enternals before anything else. I just wanted the spring kit on hand, not that I need it currently. But after these changes I may.
|
|
|
|
Post by Medina on Jan 27, 2006 11:55:05 GMT -5
I hope you know the trick to installing the MM spring... Make sure you cock the gun before taking out the end cap. This way you won't be in danger of bending the new spring when installing.
|
|
Wings
Private
Go ahead. Test me. I dare you.
Posts: 31
|
Post by Wings on Feb 16, 2006 1:03:43 GMT -5
I regularly see people recommending to cock the marker before installing the MM spring and I still disagree with this suggestion. The concept is that the spring will be compressed inside the rear bolt to the point where the guide pin is also sticking into the bolt making it impossible for the spring to kink. However this means alot more force that you have to exert to put the endcap on. While almost anyone should still be able to do it this extra effort isn't required. I have never cocked my marker prior to installing the endcap and have never kinked a spring. The key is to not woble the endcap all over to the point your bending the spring as your trying to install it. The spring will bend a little no matter what but as long as you have the guide pin in properly it should never kink.
|
|
