|
|
Post by deadaim77 on Feb 5, 2006 14:42:08 GMT -5
how do you remove the a-5 logo?
|
|
|
|
Post by LilBigMan on Feb 5, 2006 14:57:53 GMT -5
Are you talking about the "Tippmann A5" stick on the side of te gun? You can peel it off, but I know there are many other solutions with all sorts off stripers and what not...
|
|
beaker
Sergeant
Great Lakes Ranger
Getting due for some new snapshots....
Posts: 220
|
Post by beaker on Feb 5, 2006 15:31:29 GMT -5
I pulled mine off with a steak knife. It's a little tricky, and you won't have a nice looking plate when you're done. I think that 3M Adhesive remover would work better, just don't use too much.
|
|
|
|
Post by Medina on Feb 7, 2006 9:57:12 GMT -5
Just get new receiver halves. Its not pretty under there and you'll most likely scratch your A-5.
|
|
|
|
Post by wheelchair on Feb 7, 2006 10:34:39 GMT -5
Mine was pealing up on it's own after two years of abuse. I stuck the tip of a flathead screwdriver under and lifted. Definately sticky and gooey under but cleaned up nicely with some very hot water and elbow grease.
|
|
|
|
Post by sharpshooter on Feb 9, 2006 8:26:21 GMT -5
Mine also just fell off one day ... So im assuming it cant be that difficult to remove. Id suggest a slight amount of heat ( from a heat gun ) to loosen and soften the glue and Ill bet it peels off easily.
|
|
|
|
Post by skateralec on Feb 9, 2006 10:57:34 GMT -5
mine came loose so i popped it off wih a flathead screwdriver. it took some of the paint with it though, just had to touch it up with some flat black spray paint.
|
|
|
|
Post by spartan117 on Mar 7, 2006 5:44:20 GMT -5
Just warm it up with a hair dryer or a hot-air blower.
Then it should easily come off
|
|
