|
Post by SWATORNOT on Dec 19, 2005 17:22:32 GMT -5
OK fellas I just received my Flatline in the mail today and I am super excited I have the folowing mods done to my A5; Polished internals No LPK On Co2 MaddMann Spring kit.... I am wondering which spring, if any of you do, use? The Red, Blue or Green. I know I read somewhere that having the Maddmann kit will help boost your velocity up to tune easier. I do not have access to a field or chrono at this point but just thought I could get a starting point at least.
|
|
|
Post by firemedic on Dec 19, 2005 21:31:08 GMT -5
I don't know about the spring, but you can shoot it a few times and adjust the vel. screw until you get a good flight
|
|
|
Post by MerrSonn on Dec 22, 2005 19:32:33 GMT -5
It really depends on a variety of factors (paint size, temperature, etc.) There are just too many variables to even guess ahead of time. I really doubt you'll need the lightest of the springs, though. I run my flatline fine on the stock spring, which I believe is equivalent to the medium Maddman spring.
|
|
Wings
Private
Go ahead. Test me. I dare you.
Posts: 31
|
Post by Wings on Jan 19, 2006 18:14:32 GMT -5
I use the blue spring (medium) but alot of people seem to swear by the red one (strongest). I used the green spring for a little while but decided to switch just incase I ran into some ultra-small bore stuff.
|
|