Product Guide: A-5 Low Pressure Kit

[99GenX]

Taken from: tippmann.com/product_guide/accesDetails.aspx?id=39

Model No.: 02-LP
Designed to minimize recoil and improve consistency in shot velocity, this kit will increase efficiency by keeping pressure between 300 and 400 psi. Kit includes lighter rear bolt, valve assembly, low pressure feeder gas line, 90 degree elbow, 7 ¾ gas line, low pressure chamber, and vertical assembly.

Available on: A-5™

Get yours today!

[LilBigMan]

[Tagged Post]

[wheelchair]

Okay, so just how low can you take the pressure? I know I've seen some of the posts that say 'start at 425 and go down until cyclone stops working' but with the new Qloader mod for the A5, what if you didn't have to worry about powering the cyclone? Minus cyclone, just how low can you take the pressure and still recock and fire at normal fps?

Reason I'm pondering on this is I have a very low pressure HPA tank from my Impulse I'd use on my A-5 if I can get it to accept pressures under 240psi (the max output on my current HPA tank).

If anybody had the LPK and the Qloader mod, I'd love to hear about your results.

Thanks all ;-)

[Wings]

I don't know the absolute minimum you can get the LPK but I strongly doubt you'll get much below 350-400psi. Perfectly setup you may be able to drop it to 300 or a little above but thats still to high for your tank.

[dcb]

Will the LPK work with CO2?
Thanks